INTEGRATED ENGINEERING IERHVA1 Forged Rods Fsi Vw Rifle 144 1.8T 16V 8V Drilling

( Brand: Integrated Engineering ), ( Manufacturer Part Number: IERHVA1 ), ( Part Type: Rod ), ( Fitment Type: Performance/custom ), ( Note: Design To Work With 20mm Wrist Pin Pistons. ), ( Rod Length: 144nn ), ( Big End Width: 24.90mm ), ( Rod Bolt: 3/8 Arp 2000 ), ( Beam Type: H-beam ), ( Big End Bore: 50.60mm )

Review INTEGRATED ENGINEERING Forged 144 Rods 1.8t Fsi 16v Early 8v Audi Vw Rifle Drilling fits 2020

The iERHVA1 Forged 144 20 Rods are a high-performance upgrade for your 1.8T FSI 16V 8V Audi or VW engine. Manufactured by Integrated Engineering, these rods are designed to deliver enhanced power, reliability, and durability.

These forged rods are made from top-quality material, ensuring strength and resistance to fatigue. The 144 20 design offers superior weight distribution, reducing rotational mass and improving engine response. The polished finish not only adds a touch of elegance but also ensures smooth operation and reduced friction.

The integrated cap design of these rods provides better sealing, reducing the risk of oil leakage and ensuring proper lubrication. The 20-spline design ensures a secure fit with the crankshaft, reducing the chances of failure under high-load conditions.

The iERHVA1 Forged 144 20 Rods are a direct replacement for your OEM rods, making installation straightforward and hassle-free. They are an excellent choice for performance enthusiasts looking to upgrade their engines for better power and reliability. With their robust construction and advanced design, these rods are a reliable investment for your Audi or VW engine.

1. Enhanced Performance: The forged rods are stronger and lighter than cast rods, which can improve engine performance by reducing weight and increasing durability.

2. Improved Engine Life: The forged rods are less likely to fail under high-stress conditions, which can help extend the life of the engine.

3. Increased Power: The rifle drilling process can improve the flow of gases in the engine cylinder, which can lead to increased power output.

4. High-Quality Material: The rods are made of high-quality material, which can help ensure consistent performance over time.

1. High Cost: Forged rods are more expensive than cast rods, which can make them a significant investment for some car owners.

2. Installation Complexity: Installing forged rods can be more complex than installing cast rods, which may require specialized tools and knowledge.

3. Potential for Engine Damage: If not installed correctly, forged rods can cause engine damage. It is essential to have the installation done by a professional.

4. Reduced Fuel Efficiency: While forged rods can improve engine performance, they can also reduce fuel efficiency due to the increased power output.

The IERHVA1 Forged 144 20 rods 1.8t FSI 16v 8v Audi VW Rifle Drilling Integrated Engineering (IE) can offer significant performance improvements for Audi and VW engines. However, they come with a high price tag and require professional installation to ensure safe and effective use. Car owners who are looking for increased power and durability may find the investment worthwhile, but those looking for improved fuel efficiency may want to consider other options.

If you are considering buying IERHVA1 Forged 144 20 rods, we recommend consulting with a professional mechanic to assess your engine's needs and determine if the investment is worthwhile. Additionally, ensure that the installation is done by a qualified technician to ensure safe and effective use.

Details:

We rate our 4 cylinder h-beam rods for 700 hp ft lb qt.

Integrated engineering ensures the success of your next engine build by putting each set connecting rods though a rigorous quality control process. At a minimum you should use set of bearings when installing rods. Due to the wide range of engines these rods fit, please see applications table above.

In order to create this balance of strength and light weight, our optimized beam design is utilized validated using modern cad drafting fear analysis techniques. These forgings far exceed the quality of most factory rods that are typically made from powdered metal as a cost saving measure. Rifle drilling has been proven to extend wrist pin and bushing life also utilized over the years in several vw Audi factory connecting rods.

Extra attention has been paid to even the smallest details such as bearing tangs, wrist pin fit, and big end side clearance, providing a level of fit finish not found anywhere else. We put our vast European engine knowledge to use when designing each application.

In extreme applications also be sure that you are using heavy duty wrist pins. Rod weights can vary slightly per set. In extreme applications also be sure that you are using heavy duty wrist pins. Is balancing the engine required when installing these connecting rods. Since ie rods are sold in balanced sets this not.

How much do these rods weigh. The average weight of a single rod with bolts is 574 grams. Integrated engineering forged connecting rods are designed to replace the factory units and take beating from power-adding modifications. Rifle drilling is sold separately on this application.

Forged material 4340: made from strong and durable 2 piece 4340 forgings these rods will withstand almost everything you can throw at them. What pistons will these rods work with.

Lesser quality rods are often not honed with the same attention to detail.

Ie connecting are delivered to you in ready install condition.

What are the most common reasons of connecting rod failure. As one highest stressed components in engine there several things that can contribute to a failure. Fear computer optimized: all ie rods are designed specifically for the application using relevant cylinder pressure and other application-specific factors.

More technical information can be found in the basic dimensions section above as well.

0t fsi ea113, early vw 16v 8v engines when increasing the power output of an engine, internal parts begin to fail as they are pushed far beyond their limits.

Arp ie rod bolts: all rods come standard with 2000 bolts.

If you plan on exceeding this rpm level, consider upgrading to arp 625 bolts.

Is there a proper orientation to install the bearing tangs on our connecting rods. For years Integrated engineering h-beam rods have been an integral part of delivering the power that highest powered turbo setups and race engines demand.

One of the hallmarks a high quality connecting rod is its strength to weight ratio.

For extreme performance application this can still be done if desired. This design features strength, durability, stiffness and rigidity. Honed in-house: honing the connecting rod big end in-house on state of art equipment ensures tolerances are set correctly to ensure proper bearing operation.

All rods in this series feature generous wrist pin oiling, and optional rifle drilling. Do I need rifle drilling. Drilling is not required.

Connecting rods are some of the highest stressed components in an engine and thus require extreme attention to detail ensure proper operation reliability. Performance in design beam features: beam design: the h-beam is workhorse of our connecting rod product line.

What is the horsepower rating on these connecting rods. Many high vw and Audi vehicles use ie rods. Are these connecting rods forged. Yes, all Integrated engineering made from tough and durable 4340 forgings. Oiling system health is also essential to ensuring save engine operation.

What is the maximum rpm limit of these rods. Can be affected by many factors. Rods fit several vw Audi engines that use a 144x20mm rod. Momentary oil starvation can result in spun rod bearings and engine failure.

part #: ierhva1 prices

• $599.00-$749.99

specifications pistonringro:

• for makes: Audi
• for years: 2020
• brand: Integrated Engineering
• mpn: Ierhva1
• part type: Rod
• fitment type: Performance/custom
• note: Design To Work With 20mm Wrist Pin Pistons.
• rod length: 144nn
• big end width: 24.90mm
• rod bolt: 3/8 Arp 2000
• beam type: H-beam
• big end bore: 50.60mm

Ratings:

1. A GREAT ! 07-25-17
2. Thank you for your purchase with Rays Performance! 07-25-17
3. fast shipping product as described recomended seller 07-25-17
4. Fast shipping. Good communication. Well buy more later. 07-25-17

Shipping pistonringro:

• handling: 1 days
• type: Flat
• cost: $0.0

Offer pistonringro:

• best offer: true
• Started: July 25, 2017, 7:19 am
• bids: 0
• Sold: 0
• quantity: 2

Returns pistonringro:

• type: Money back or exchange buyers choice
• details: Returns are accepted on brand new items in their original packaging up to 30 days after purchase in exchange for merchandise credit. Exchanges piston size, compression ratio, etc are subject to a restocking fee depending on part number andWhen you receive your order, please open the boxes immediately and confirm that all parts are correct not only by the part number on the box, but measurement of the contents as well to discover any possible packaging errors at the manufacturer, as we cannot accept any returns after the 30 day window, regardless of fault. We strive to offer the best and quickest service in the industry, however we are just humans. If we or the manufacturer made a mistake, please bring it to our attention immediately so we can correct it within the alloted time frame.
• paid by: Buyer
• policy: returns accepted
• time: 30 Days

General pistonringro:

• in stock: Yes
• condition: New
• motors > partsaccessories > automotive parts enginescomponents > pistons rings rodsparts engines components

Payments pistonringro:

• PayPal

Seller pistonringro:

• zipcode: 32771
• city: Sanford, Florida

Integrated Engineering IERHVA1 Is Similar To:

• Ierhva1-rd Integrated Engineering Ie Forged Beam Rods Rifle Drilling Audi Vw (69% similar) All rods in this series feature generous wrist pin oiling, and optional rifle drilling of stretch using the included arp assembly lubricant. This design features strength, durability, stiffness and rigidity. 8t 20V aftermarket pistons only engine codes: ABM, ARC, aery, ate, aim, AM, AP, awe, JX vw ...(January 31st, 2019)