CP PISTONS SC73081 Forged Skyline 87.0MM 1.0 8.5

( Brand: Cp Pistons ), ( Manufacturer Part Number: SC73081 ), ( Bore: 1.0 Over Standard Bore ), ( Compression Ratio: 8.5 ), ( Pin Size: 21 Mm ), ( Compression Height: 1.240 In ), ( Rod Length: 121.5 Mm ), ( Material: 2618 Alloy ), ( Stroke: 71.7 Mm ), ( Bore Size: 87.0 Mm ), ( Vehicle Make: Nissan )

Review CP PISTONS Forged Skyline 87.0mm 1.0 Bore 8.5 fits RB25DET

The SC73081 Forged Pistons for the Skyline RB25DET engine are a premium upgrade for performance enthusiasts seeking enhanced power and reliability. These pistons are meticulously crafted using forged billet aluminum alloy, ensuring superior strength and durability compared to cast pistons.

The SC73081 pistons measure 87.0mm in bore diameter, making them suitable for RB25DET engines with standard or slightly modified engine builds. The piston skirt is designed with a unique and optimized shape, promoting better ring seal and reducing friction for improved engine efficiency.

The SC73081 pistons feature a compression ratio of 1.0:1 and an 8.5mm piston crown height, which is ideal for engines with moderate power output. The piston crown is engineered with a high-polished finish, ensuring smooth combustion and reducing the likelihood of detonation.

The piston rings included with the SC73081 set are made of high-quality chrome molybdenum alloy. The top ring is a 2-piece design with a tension ring, ensuring a consistent and accurate fit in the groove. The second ring is a low-tension oil control ring that helps prevent oil consumption.

The SC73081 Forged Pistons for the Skyline RB25DET engine are accompanied by a detailed installation guide, ensuring that the installation process is straightforward and hassle-free. These pistons are a reliable and cost-effective upgrade for your RB25DET engine, providing enhanced power and reliability for your driving pleasure.

1. High-quality material: SC73081 forged pistons are made of high-strength alloy, ensuring durability and reliability under high engine pressures.

2. Enhanced performance: Forged pistons have a more precise shape and better design, allowing for increased combustion efficiency and power output.

3. Improved thermal conductivity: Forged pistons have better heat dissipation, reducing the risk of engine overheating and increasing engine lifespan.

4. Better piston-to-wall clearance: Forged pistons have a tighter fit in the cylinder bores, reducing the chance of piston slap and engine noise.

1. High cost: Forged pistons are more expensive than cast pistons due to the higher manufacturing process and materials used.

2. Special tools required: Installing forged pistons may require specialized tools and knowledge, which can increase installation cost.

3. Close tolerances: Forged pistons have tight tolerances, making it crucial to maintain proper engine clearances and alignment for optimal performance.

4. Limited availability: Forged pistons may not be readily available for all engine models and may require longer lead times for delivery.

SC73081 forged pistons offer several advantages for Skyline RB25DET engines, such as improved performance, durability, and heat dissipation. However, they also come with a higher cost, the need for specialized tools, and close tolerances that require precise engine maintenance. If you are looking to enhance your engine's performance and reliability, forged pistons could be a worthwhile investment, but it's essential to weigh the pros and cons and ensure you have the necessary resources to properly install and maintain them.

If you decide to go with SC73081 forged pistons, consider working with a reputable engine builder or performance shop that has experience with forged pistons and can ensure proper installation and maintenance. Additionally, budget for the cost of the pistons, any required tools, and the potential for additional engine tuning to fully realize the benefits of the forged pistons.

Details:

This core group allows Cp to explore angles not possible using conventional methods. A wholesale program is available for businesses. Pin fitting the bore is precision honed to attain an exact clearance.

Double pin boilers opposed to single, in conjunction with our annular reservoir, can add twice the amount of oil from cylinder wall wrist pin bore.

Having the correct cam and barrel on a part promotes following: Please for expedited shipping. These grooves also protect the top ring by disrupting detonation waves.

This commitment has resulted in more forgings specific to certain applications, proprietary treated wrist pins and rings manufactured only for Cp. This is a standard option on any piston that receives forced pin oiling. Increased durability anti detonation grooves contact reduction also know as grooves, which limit the piston cylinder during high temperature and rpm.

Less noise 3. 003 between the wrist pin and pin bore. Accumulator groove-shaped groove machined in the 2nd ring land that adds to volume between top and second.

Cam and barrel the is the shape around skirt of piston barrel from under oil ring to bottom. More power 5.

Extensive research and development has been done to find the optimum skirt shape for each piston.

Broaches are also used to accommodate the wrist pin shape under compression, as it can become somewhat oval and needs room in order alleviate galling.

Depending on the forging and application, different cam barrel profiles are utilized for maximum performance.

These shapes have been found to seal up cylinders and reduce harmonics in the bore better than ever before. Tighter clearances 2.

Territory is by the us postal service. Broaches are horizontal slots in the pin bore designed to allow oil enter between wrist pin. Better ring seal 4.

Each of these aspects has been put through stringent research and development stages to ensure that Cps product will exceed your standards.

Depending on the application clearances typically range from. This groove accumulates residual gasses from combustion which alleviates top ring flutter and premature second wear, improving seal.

Virgin islands and any other us.

part #: sc73081 prices

• $1225.00-$1841.12

specifications pistonringro:

• for models: Rb25det
• brand: Cp Pistons
• mpn: Sc73081
• bore: 1.0 Over Standard Bore
• compression ratio: 8.5
• pin size: 21 Mm
• compression height: 1.240 In
• rod length: 121.5 Mm
• material: 2618 Alloy
• stroke: 71.7 Mm
• bore size: 87.0 Mm
• vehicle make: Nissan

Seller pistonringro:

• rating 02-09-19: 100.0%
• zipcode: 32807
• # feedbacks 02-09-19: 1354
• city: Orlando, Florida

Payments pistonringro:

• PayPal

Offer pistonringro:

• Started: February 9, 2019, 2:07 pm
• quantity: 1
• bids: 0
• best offer: true
• Sold: 0

Returns pistonringro:

• paid by: Seller
• policy: returns accepted
• time: 30 Days

General pistonringro:

• condition: New
• Engines Components > Pistons, Rings, Rods Parts
• in stock: Yes

Ratings:

1. Good buyer, prompt payment, valued customer, highly recommended. 02-04-19
2. AAAAAAAAAAA 01-30-19
3. S per excelente 01-31-19
4. Good buyer, prompt payment, valued customer, highly recommended. 02-07-19
5. Aaa 02-08-19

Shipping pistonringro:

• type: Flat
• handling: 15 days
• cost: $0.0

Cp Pistons SC73081 Is Similar To:

• 174548 Cp Lamborghini Pistons Pins Locks Rings Set New Standard Bore (39.6% similar) Honing weight tolerances gram precision ground ends with.s with 3 stages of. Radius chambered ends for wire locks cryogenic ally treated subzero heat-treating process improved material strength and grain structure rings:part number: 787X050 slept type:piston wrist pin retainers product line:Cp ...(September 2nd, 2018)
• 8-927-2500-15cp1c Cp Pistons New Chromemoly Pins Od Long Wall (42.4% similar) ...(June 2nd, 2018)
• 866-2250-20cp3c Cp Pistons Upgraded Wrist (45.6% similar) Brand name: Cp Pistons part number: 20CP3C specifications:wrist pin diameter: 866MM. 1 micron surface finish case hardened computerized gas process gun drilled. Type: chorally wire material: 9310 steel wall thickness: 200MM. Radius straight wall design to reduce pin galling on ends available with ...(December 3rd, 2017)
• Bbc5311-060 Cp Pistons Carrillo Forged And Rings Bbc Big Block Chevrolet (50.9% similar) Only un packaged to take pictures. Second ring material: cast iron facing phosphate coated oil thickness: 3/1 6 in. 50CC wrist pin style: press-fit or floating diameter in. Cp Pistons bullet series are manufactured from 2618 alloy for strength and durability. Having bullet series Pistons means that ...(August 8th, 2018)
• Bc1100-060 Cp Carrillo Sbc Bullet Pistons Ft (36.6% similar) 125HEAD cc - 64DOME height . Questions on fitment for your application. 75ROD - 6COMPRESSION height . 310 both engine - 413WEIGHT 430TYPE ft valve reliefs 2 smogs ports neonates, 2CYL...(April 9th, 2018)
• Bcr1320-040 Cp Pistons Bullet Small Block Chevy Flat Top (46.8% similar) height dish dome volume gram weight head cubic centimeters 64CC 500 contact reduction grooves accumulator groove dual forced pin boilers includes rings ring package designed for: comp. 0MM rings included part number cubic inch bore stroke rod length block height BCR1320. Cp bullet series small...(March 1st, 2018)
• Bf6111-std-8 Bullet Piston Cp Pistons Series Bore Dished Set 191215071050 (36% similar) 935069CP0POB047. The offered shipping cost in listing applies only to 48 states. 400 rod length please for details. Q: what is the shipping cost. Grab the best deal. 125 bore dished piston set open box - new this item is unused in packaging. Q: is local pick-up available. Q: is the original box ...(April 13th, 2018)
• Bf9821-std-crs5933f3d Cp Bullet Pistons Eagle Rods Arp For Ford Modular (36.7% similar) All eagle h-beam rods are forged from certified 4340 chorally steel. This is significant because it enhances the strength of rod cap by orienting grain metal with direction stress. All Cp Pistons are engineered using sophisticated computer model ING for optimum designs, while their 5-AXIS machining ...(November 21st, 2018)
• Bhm107-3 Cp Carrillo Forged Pistons Harley (40% similar) Cp Carrillo piston kits this add is for twin cam 107 builds extra thanks mike Dare cycles...(February 22nd, 2017)
• Bls1004-005-8 Cp-carrillo Cp Bullet Pistons (29.6% similar) 250RING THICKNESS1. 000ROD6 for Chevy ls series part BLS1004-005 brand new in box picture reference only. 195DISH DOME-27. 0:1PIN diameter. 0MMVR2 VR'DVR depth. 155WEIGHT406GAS portent includes pins, locks and rings made in USA manufactured from made oversized proprietary steel forgings to enable ...(November 4th, 2017)
• Blsr1205-005 Cp Bullet Bore Stroke Flat Top Piston Kit (28.3% similar) Buyers with APO FPO and PO. 6COMPRESSION ratio w 70CC: 11. 125COMPRESSION height in. 250ALLOY:2618RINGS included:yessing SIZES:1. 055CROWN volume cc: -4. 130STROKE in. Cp bullet LS7 4:1WRIST pins included:ye spin diameter in. 927PIN length in. 6CC flat top piston kit BLSR1205-005 picture for ...(February 19th, 2019)